P11 pipe cap is an industrial pipe fitting welded on the pipe end or installed on the external thread of the pipe end to cover and plug the pipe. It is used to close the pipe and has the same function as the pipe plug
P11 pipe cap includes the design of convex pipe cap, conical shell, reducing section, flat cap and tight mouth. The convex tube cap comprises a hemispherical tube cap, an elliptical tube cap, a dish shaped tube cap and a spherical crown shaped tube cap. Standard pipe caps, alloy pipe caps, and alloy pipe cap manufacturers are getting worse from the perspective of force, but from the perspective of manufacturing difficulty, the convex pipe caps are getting better
The use value of P11 pipe cap and stainless steel elbow is different, and the impression and satisfaction of users will also be different. Therefore, when using pipe cap and stainless steel elbow, pay attention to their different properties and characteristics, and use them according to different environments and use ranges
In order to prevent the tube cap blank from cracking, intermediate annealing shall be carried out when necessary to protect the required deformation capacity. In order to maintain good lubrication, the pipe cap can be phosphatized on the blank. When bar and wire rod are used for continuous processing, the cross section cannot be lubricated at present, and the possibility of phosphating lubrication method is being studied. Forging can be divided into free forging, upsetting, extrusion, die forging, closed die forging and closed upsetting according to the moving mode of the blank
Phone:+86-0317-6811238
Phone:+86-18303170017(Ethan Liu)
wechat:15031897777
E-mail:info@wrpipefitting.com
Address:Muzhuang Industrial Zone, Mengcun Hui Autonomous County Cangzhou City,Hebei Provice, China
Open mobile station