Reducer

Reducing reducer refers to the reducer whose center is not on the same straight line. Its function is to stick to the wall or stick to the ground to walk the pipeline without occupying space, and it is to connect two pipes with different diameters to change the flow

The reducer is mainly used to solve the problem of different diameters when connecting pipes. It also has the function of reducing vibration and noise. The eccentric reducer can save the parts and costs of pipes during installation. The utility model is composed of an inner rubber layer, a fabric reinforcing layer, a middle rubber layer, an outer rubber layer, an end reinforcing metal ring or a steel wire ring, a metal flange or a flat movable joint. The reducer is mainly installed in the pump for stable performance, and the reducer at the pump inlet and outlet is generally installed flat on top to prevent the gas phase in the pipeline from gathering at the pump outlet, forming large bubbles into the pump cavity and damaging the pump. Only in one case can the low flat installation be carried out, that is, the elbow directly connected to the upward bend behind the reducer, in which case the gas phase cannot gather. The eccentric reducer can also reduce the noise of the pipeline when working

Reducing reducer is a pipe fitting used for pipe reducing, commonly known as&# 39; Eccentric reducer&# 39;, It is one of the common pipe fittings in the pipeline system. Eccentric reducers are generally used on the inlet and outlet pipes of pumps. Their main functions are to prevent cavitation and liquid accumulation. During the installation process, there are two main methods: bottom leveling and top leveling. Their installation positions are different, so their functions are different. When installing, we need to find out the lower point or higher point of eccentric reducers, so as to install them according to the installation method

Applications of reducer products: petroleum gas pipeline engineering, natural growth gas pipeline engineering, chemical plants, power plants, shipyards, pharmaceuticals, dairy products, beer, beverages, water conservancy, etc

Material

Carbon steel: 10 #, 20 #, A3, Q23 excellent, 20G, 16Mn, ASTM A234, ASTM A105, etc.

Stainless steel: ASTM A403, 1Cr18Ni9Ti, 0Cr18Ni9, 00Cr19Ni10, 00Cr17Ni14Mo2, 304, 304L, 316, 316L, etc.

Alloy steel: 16MnR, Cr5Mo, 12Cr1MoV, 10CrMo910, 15CrMo, 12Cr2Mo1, A335P22, St45.8/Ⅲ, A10bB