WPL6 reducer

WPL6 reducer is a kind of pipe fitting used for pipe diameter. The commonly used forming process is reducing, expanding or reducing plus expanding, and stamping can also be used for reducing pipes of certain specifications

The reducing forming process of WPL6 reducer is to put the tube blank with the same diameter as the big end of the reducer into the forming die. By pressing along the axial direction of the tube blank, the metal moves along the die cavity and shrinks to form. According to the size of reducer, it can be divided into one press forming or multiple press forming

Precautions for using WPL6 reducer:

1. If the fluid flow changes in the pipeline, it will become larger or smaller. If the requirements for flow rate change are not strict, we can choose to use a reducer

2. Avoid the impact of cavitation on the big and small head at the big and small head pumps

3. If it is matched with some instruments, such as regulating valve or flowmeter, we can also select reducer again

In addition to using steel pipes as raw materials to produce WPL6 reducers, steel plates can also be used for the production of some sizes of reducers. The shape of the die used for drawing is designed according to the size of the inner surface of the reducer, and the blanking steel plate is punched and stretched with the die. In production, the door frame assembly is often uneven at the interface between the body and the cross head, which greatly affects the matching. Reducer is a kind of pipe fitting used at pipe reducer. The commonly used forming process is reducing and expanding, or reducing and expanding, and stamping can also be used for some sizes of reducer. For example, for a door frame with a standard size of 140mm wide, the measured width becomes 141 during assembly. 1mm。 The reducer shall be controlled and used in accordance with the process and production principle during the forming and manufacturing, and shall be strictly controlled and used in accordance with the above processes and standards